시간 작업 시간 착용할 수 있는 무선 전신 QR 코드 스캐너 12를 장갑을 끼고 울리세요

It's the lightest, most ergonomic, wearable scanner on the market. With a user-focused design, the glove solutions are built to increase efficiency across a wide range of industrial environments including manufacturing and logistics. Give your operators an edge by equipping them with the wearable scanning solution.

Features

Superior Decoding Ability
Zebra Scan engine, fast decoding one-dimension, and 2d barcodes

Bluetooth 3.0 Data Transmission
40 Meter Bluetooth Transmission, BLE for optional

Communication
Class 3 Bluetooth HID, SPP with 50M distance

Power Battery
Built-in 550mAh Rechargeable & Removable Battery. Which allows you to keep your ring scanner in service every minute of every shift

Offline Mode
Offline scan barcodes support to save more than 6000 barcodes. U disk for optional

System Compatibility
Android /IOS / Windows

NFC Connection
Just tap for instant pairing: with NFC, workers can simply tap the PS02 ON NFC-enabled android devices. No need to scan a pairing barcode or open Bluetooth settings to identify and select the device.

Product name	Wearable Ring 2D Scanner
Model name	FS02P
Dimensions	Length:55.0mm, Width: 39.2mm, Height:51.2mm
Weight	65grams
Electrical	Power: DC5V Typical: 300mA DC5V
CPU	32bit ARM CPU
Data storage	100KB for offline mode: 6000 15 bytes barcodes(Other flash is optional).
Working mode	Bluetooth mode, offline mode and RS232 mode(optional)
Scan mode	Manual mode, Continuous, Host, Sense mode
Ambient illumination	0~107,639 lux
Scanner performance	Sensor Type: 640 (horizontal) × 400 (vertical) pixels Light: 610nm LED 660nm red LED Scanner Angle: ±60°,±60°,±360°(skew, pitch, Roll) Field of view: Horizontal: 42° , Vertical: 28° Contrast: ≥20%
Battery power	Internal Battery: Rechargeable 550mAh Li-ion Battery, Standby 30 days, working time after full charge with good decode as below: Continuous trigger scanning interval Decoding number Working time 1S 10325 2.9hours 5S 6006 8.3hours 10S 3871 10.7hours Charge time: About 2 hours
Barcode Type	1D	UPC-A, UPC-E, UPC-E1, EAN-8/JAN-8, EAN-13/JAN-13, Bookland EAN, ISSN EAN, Code 128, GS1-128(formerly UCC/EAN-128), ISBT 128, Check ISBT Table, Code 128 Reduced Quiet Zone, Code 39, Trioptic Code 39, Convert Code 39 to Code 32, Code 32 Prefix, Code 39 Check Digit Verification, Code 39 Full ASCII, Code 39 Reduced Quiet Zone, Code 93, Code 11, Interleaved 2 of 5, I 2 of 5 Readuced Quiet Zone, Discrete 2 of 5, Codabar(NW-7), CLSI Editing, NOTIS Editing, MSI, Chinese 2 of 5, Matrix 2 of 5, GS1 DataBar-14, GS1 DataBar Limited, GS1 DataBar Expanded, Convert GS1 DataBar to UPC/EAN/JAN, Composite CC-C, Composite CC-A/B, Composite TLC-39, GS1-128 Emulation Mode for UCC/EAN Composite Codes
	2D	PDF417, MicroPDF417, Code 128 Emulation, Data Matrix, Maxicode, QR Code, Micro QR, Aztec, HanXin, US Postnet, US Planet, UK Postal, Japan Postal, Australia Post, Netherlands KIX Code, USPS 4CB/One Code/Intelligent Mail, UPU FICS Postal
Decoding depth &	Code 39		51mm -162mm (5mil);

 

Max. Resolution (1 mil = 0.0254 mm)	Code 128	63mm -127mm (5mil);
	PDF417	63mm -160mm (6.6mil);
	PDF417	45mm - 228mm (10mil);
	100%UPC	50mm -317mm (13mil);
	Code 39	50mm - 495mm (20mil);
	Data Matrix	38mm - 343mm (20mil);
	QR Code	38mm -279mm (20mil).
Communication	Class 3 Bluetooth HID, SPP, BLE(optional) with 30M distance, RS232 cable(optional)
OS	IOS, Android, Windows, Mac
Certificate	CE, Rohs, FCC, EN60950, IEC60825, IP65, EMC, 1.5m drop test(200 times). Utility Model Patent No.: ZL201420211350.8
Laser safety	IEC60825-1-2007, Class 1
Temperature	Operating: -20°C to 60°C (-4°F to 140°F); Storage: -40°C to 70°C (-40°F to 158°F)
Humidity	5% to 90% (non-condensing)
Accessories	1× FS02P: 1× 3.7V 15320 Li-ion battery: 1× Velcro: 1× Silicone Case: 1× Charger cabale(optional)
Barcode scanner charger & Bluetooth adapter	Product name	Barcode scanner charger & Bluetooth adapter(optional)
	Model name	BFP1
	Dimensions	72.0mm L × 56.0mm W × 40.3mm H
	Weight	50grams
	Power	DC:5V/500mA
	Charge current	250mA
	Interface	1×Type-C(For charge or data transmission):5V DC
		2×DC jack(optional): 5V DC
	Characteristic	It can charge both batteries and machines at the same time. The charger can be multiple connected(optional). (In order to ensure charging efficiency, it is recommended that no more than 5 chargers be connected.)
	Adapter Working mode	HID keyboard,Virtual Serial Port , RS-232(optional)

 

 

More detail, Please contact:

Amber

Skype: postechsales8

whatsapp: +8615013918037